2.5 GPM, 3100 PSI Pressure Washer — EPA, CARB-Compliant. Instructions for Installation/Set-up, Operation, Maintenance, & Storage. This pressure washer produces cold water high pressure spray. Cleaning chemicals may be incorporated into the spray if desired. The pressure pump for this equipment is powered by a ...

instructions. SAFETY MESSAGES. Your safety and the safety of others are very important. We have provided important safety messages in this manual and on the ...... Pressure washer applications. NGK - BPR5ES. All other applications. SPARK PLUG. WRENCH. 0.028 ~ 0.030 in. (0.70 ~ 0.80 mm ). SEALING. WASHER.

back of the manual near the assembly diagram (or month and year of purchase if product has no number). .... detergents not designed for pressure washers. ..... minimum of five gallons of clean, cold water per minute at 20 PSI. Only use a 5/8" inner diameter. (or larger) hose that is rated to meet this capacity. Figure B.

refer to your equipment manufacturer's manual for other important safety information. This manual contains safety precautions which are explained below. Please read carefully. WARNING. Warning .... until the piston is at the top of its stroke (pressure against the thumb is greatest). ... Net Peak Torque (ȓ 2600 RPM ). XT-6 .

The Engine Owner's Manual provides information regarding the U.S. Environmental Protection Agency. (EPA) and the California Emission Control ..... to cause cancer and reproductive harm. Wash hands after handling. ..... If pressure is less than 2600 PSI, causes are; internal relief valve is faulty or internal pump parts are ...

Find the manual, report, supplier, document or other Wagner SprayTech product download you are looking for right here! Wagner is an industry leader.

IMPORTANT: Please provide a copy of the FoamPro manual to the end user of the equipment. ... Do not pump at pressures higher than the maximum recommended pressure. [400 PSI (28 bar)]. • Do not permanently remove or alter any guarding devices or attempt to ...... washer is missing, or damaged water can enter.

Oil Pressure Test Kit. For testing/verifying oil pressure on pressure lubricated engines. Kohler 25 761 06-S. Radiator Tester. For pressure testing radiator and cap ..... C Fuel Shut-Off Gasket D. Wave Washer. E. Fuel Shut-Off Valve. F. Main Nozzle Tube. G. Main Jet. H. Bowl Gasket. I. Fuel Inlet Needle. J. Spring. K. Hinge Pin.

IMPORTANT: Please provide a copy of the FoamPro manual to the end user of the equipment. For additional FoamPro manuals, contact by ... Do not pump at pressures higher than the maximum recommended pressure (400 psi [28 ..... seal washer is missing or damaged, water can enter the connector and cause corrosion ...

Fleet service facilities. • Service shops. • In-plant. • Lube trucks. • Mining. Typical Fluids Handled. • Water. • Anti-freeze. • Windshield wash fluid. • Used oil. • Used anti-freeze. NOTE: Use Fast-Ball 1:1 for petroleum-based products. 226947. (1) Max Operating Air Pressure for 226951 is 60 psi (4.2 bar). (2) For universal pumps.

PTFE 212°F (100°C). UHMWPE 158°F (70°C). Min/Max Air Pressure. 30 psi (2 bar) minimum startup air pressure. 100 psi (7 bar) maximum supply air pressure. Max. Sound Pressure. 70.6 dB(a). Max. Sound Power. 64.2 dB(a). Instruction Manual. 334792. *May vary depending on materials. Part Number. Model. Fluid Path.

PRESSURE WASHER HOSE. DESCRIPTION. PAGE #. TPR HOSE. 92. 2600 PSI / 3700 PSI Female Metric x Female Metric Assemblies. XTREMEFLEX HOSE. 92. 3100 PSI XtremeFlex — Female Metric x Female Metric Assemblies. RUBBER HOSE. 92 — 93. 3000 PSI — Male Pipe Thread x Male Pipe Thread Swivel ...

pressure: 350 bar static, 690 bar peak. (5000 psi static, 10,000 psi peak). Mounting: Any orientation. Threaded flange M18 x 1.5 or 3/4 - 16 UNF-3A. Typical ..... Mounting feet, insulated (304 SS). Profile-style sensor mounting for sensor model RP. Nylon washers and cloth tape on the bottom provide electrical isolation.

Instruction manual. 308652. 308652. 308652. ** Displacement per cycle may vary based on suction condition, discharge head, air pressure and fluid type ... Husky 205 Performance. aIr PreSSure. legenD. = at 100 psi (7 bar, 0.7 MPa). Air Consumption. = at 70 psi (4.8 bar, 0.48 MPa). Fluid Flow. = at 40 psi (2.8 bar, 0.28 ...

2600. Watts. 500. 260. Voltage. 120V / 60hz. 12V. Maximum Amperage. 4.5A. 22A. Duty Cycle. 20 min ON/OFF. 20 min ON/OFF. Graco SD Blue Pneumatic Pump. Technical Specifications. Husky 515 AODD. Maximum Flow Rate. 15 gpm. Maximum Fluid Pressure. 50 psi. Air Operating Range. 30-50 psi. Air Inlet. 1/4” NPT(f).

2017 / 2018 AIRCRAFT SPRUCE CATALOG PDF DOWNLOAD & VIRTUAL ONLINE CATALOG ...... 450: Power Flow Systems Inc. Exhaust Systems, Aviat Husky, Cessna 172, Cessna 177, Cessna 177a , Cessna 177b, C-177rg, Grumman Aa-5, Grumman Aa-5b, Glastar & Sportsman 2 2, Piper Pa-28-140 , Piper Pa-28-150, ...

2600. 2900. 3125. 3520. 4100. 4750. No. 12. 3/4”. 3750. 4180. 4500. 5060. 5950. 6800. HOSE SELECTION GUIDE for blasting at 100 psi. NOZZLE SIZE. No. 4. No . .... pressure washers . This abrasive is great for degreasing, cleaning and depainting, while remaining harmless to the environment . BOSS Blast abrasives also ...

936-295-9900. 888-857-8611. September 2015. Visit Us At www.huskytrailers. com ..... Tekonsha Automatic or Manual - Electronic - Primus - 2, 4, 6 & 8 Brake. $. 89.99. TAP. 506. Safety Breakaway Kit w/Charger. $ ...... Actuating pressure not to exceed 1700 psi. Suspension: Rubber bushed anti-hop. 5-leaf spring, 21/2” wide  ...

Apr 2, 2017 ... Revision:1.2. Design Standards Manual. 32. Service valves shall be butterfly valves. Within vaults: Class 150, Single-Flange, Butterfly Valves: Standard: MSS SP-68. CWP Rating: 200-PSI. Body Design. Lug type; suitable for bidirectional dead-end service at rated pressure without use of downstream flange.

that the cap be cleaned by washing in kerosene. OIL PRESSURE AND ADJUSTMENT. HIGH PRESSURE SYSTEM. Oil supplied to the center main and connecting rod bearings, at 40 to 4S P.S.I. gauge pressure (was SO. P.S.I.), is controlled by a pressure relief valve, pro- perly adjusted at the factory. Readjustment, when.